Table of Contents
Advertisement
9.5.4.2 Individual Call by Manually Entering a MMSI
You may enter an MMSI number manually to contact a vessel without storing
the MMSI in the individual/position call directory.
1. Press the
CALL
Individual " is selected. (To cancel,
press the
CLR
3. Press the
ENT
appear.
4. Rotate the DIAL
press the
ENT
5. Press an appropriate number key on the keypad
want to contact.
6. Repeat step 5 to set the MMSI number (nine
digits).
7. If a mistake was made entering in the MMSI
number, repeatedly press the
wrong digit is selected, then press an appropriate
number key to correct the entry.
and hold the
9. Rotate the DIAL knob to select the operating
channel you want to communicate on, then press
the
key.
ENT
10. Press the
ENT
signal.
11. When an individual call acknowledgment is
received, press the
change to the channel which is selected on step 5
above and a ringing tone sounds.
12. Listen to the channel to make sure it is not busy,
then press the microphone's PTT switch and talk
into the microphone to the other vessel.
Page 56
DSC Menu " will appear.
key.)
key. The individual directory will
key.
key.
ENT
key to transmit the individual DSC
key to automatically
CLR
Manual ", then
key until the
H/L
-DSC Menu-
Individual
Group
All Ships
POS Request
POS Report
QUIT
SELECT
[ENT]
[CLR]
-Individual Call-
Manual
Horizon
YAESU
Standard
Bob
QUIT
SELECT
[CLR]
[ENT]
-Individual Call-
Input MMSI
ID:---------
QUIT
SELECT
[CLR]
[ENT]
-Individual Call-
Input MMSI
ID:34567 901
QUIT
SELECT
[CLR]
[ENT]
-Select Intership CH-
06
0
09
10
13
QUIT
SELECT
[CLR]
[ENT]
-Individual Call-
Name:
ID:34567 901
Category:Routine
CH: 06
Transmit?
QUIT
YES
[CLR]
[ENT]
-Individual Call-
Name:
ID:34567 901
CH: 06
Since:01:03
Waiting for ACK
QUIT
RESEND
[CLR]
[ENT]
-Individual Call-
Name:
ID:34567 901
CH: 06
Since:01:03
CONNECTED
QUIT
[CLR]
GX5500S
Advertisement
Table of Contents
