Table of Contents
Advertisement
-/*
DISTRESS
PULL OPEN
In some areas powerful AM broadcast stations may be heard when in listen-
back mode. In this case change the speaker wire to 2-conductor shielded
audio cable. See the illustration below for connections.
-/*
JKL
DISTRESS
PULL OPEN
External GPS Connections (4800 baud)
NMEA Input (GPS Information)
the setup menu. If there is a selection for parity select none.
contact the manufacturer of the GPS receiver.
GX5500S can read NMEA-0183 version 2.0 or higher.
sentence is recommended for position information).
NMEA Output (DSC and GPS Information)
If you have further inquires, please feel free to contact Product Support at:
Phone: (800) 767-2450
Email: marinetech@yaesu.com
GX5500S
JKL
Shield
Red
Blue
Green
Gray
Brown
Shield
White
Shield of cable is not
attached on PA Speaker end
Red
2 conductor shielded
Bare
Connect the bare wire from the GX5500S
to one wire and to the shielded.
Make red and bare connections short as possible
PA Speaker
( )
NMEA OUT
( )
NMEA OUT
NMEA IN
( )
( )
NMEA IN
GPS Receiver
External Speaker
PA Speaker
Page 17
Advertisement
Table of Contents
