Cleaning the water filter
The water filter prevents foreign ob-
jects in the water from entering the
steam ironing system and causing
damage.
The water filter can be cleaned if it is
dirty or clogged. You will notice if the
water filter is dirty since this will cause
more frequent pumping noises from the
water feed pump.
Disconnect the power supply
Switch off at the wall socket and
withdraw the plug before cleaning the
water filter.
Removing the water container
Hold the water container by its
handle.
Pull the handle downwards.
The water container is released from the
retainer.
Pull the water container upwards and
out.
Cleaning and care
Removing the water filter cover
Use a cross-head screwdriver to re-
move the screw of the water filter
cover.
Pull the water filter cover upwards.
The water filter must be taken out of
the right hand socket for cleaning.
There is a hook and a round tool at the
sides of the water filter cover. Use
these to remove the sealing ring from
the socket and pull out the water filter.
59