Miele FashionMaster Operating Instructions Manual page 8

Warning and Safety instructions
Technical safety

Before setting up the steam ironing system, inspect it visually for
any external damage. Never use a damaged steam ironing system. A
damaged steam ironing system can be dangerous!

Check the iron of the steam ironing system for damage. Do not
use the iron if it has been dropped, if there is any visible damage or if
it is leaking.

Before connecting the steam ironing system to the power supply,
please ensure that the mains supply voltage (voltage and frequency)
complies with the values given on the data plate.
Connection to a supply voltage other than the one quoted on the
data plate can lead to functional faults and damage to the steam
ironing system. If in doubt, contact a suitably qualified electrician.

Always remove and unwind the power cable of the steam ironing
system completely from its (lower) storage compartment.

If the connection cable is damaged it must be replaced with a
special cable of the same type (available from Miele). For safety reas-
ons this must only be fitted by a Miele authorised service technician
or the Miele service department.

Do not use the steam ironing system if the ironing board cover is
damaged.
A damaged ironing board cover could be dangerous.
Do not use the steam ironing system without an ironing board
cover.
The ironing board cover must be replaced with an original Miele
cover.
8