Cleaning Or Replacing The Ironing Board Cover - Miele FashionMaster Operating Instructions Manual

Cleaning and care
Cleaning or replacing the iron-
ing board cover
If the ironing board cover is soiled, you
can wash and dry it. If the ironing
board cover is damaged, it must be
replaced before using the steam iron-
ing system again.

When removing the ironing board
cover, always ensure the steam iron-
ing system is switched off and the
plug is removed from the wall
socket.
Wait until the ironing board has
cooled down.
 Pull the fastener of the ironing board
cover out of the cavity at the tapered
end of the ironing board.
 Undo the fastener on the ironing
board cover by pushing the small
toothed wheel at the centre of the
fastener outwards.
 Remove the cover in the direction of
the tower.
The felt pad remains on the ironing ta-
ble.
58
 Wash and dry the ironing board cover
according to the care label or replace
the cover if it is damaged.
Never use the steam ironing system
without the ironing board cover in
place!
 Put the dry or new cover onto the
ironing board from the tower end first
and draw it down towards the
tapered end of the ironing board.
 Use the cord to pull the cover taut.
Ensure the cover is secure.
 Secure the ironing board cover in po-
sition by pushing the small toothed
wheel on the fastener to the middle.
 Push the fastener back into the cavity
at the tip of the ironing board.