Advertisement
5HFHLYHU6WDWXVPHQX
Information about the current receiver setup and about current receiver operating
conditions is available from the Receiver Status menu, including ADP count. The
current setup is also affected by your LNB antenna (dish) installation.
To display the Receiver Status menu…
Step 1.
Main Menu
Step 2.
Receiver Status
Available options: Move to Exit and press SELECT (or press 1 and then SELECT)
to return to the previous menu. You can also select USER SETUP (or press 2 and
then SELECT) to display the User Setup menu, or select RECEIVER SETUP (or
press 3 and then SELECT) to display the Receiver Setup menu, or select
CONFIGURATION (or press 4 and then SELECT) to display the Configuration
menu.
You can view information about the current setup. Your dealer/reseller or local
service provider can advise you about what receiver settings you may need to
change. The following available satellite broadcast services information is dis-
played on-screen.
‰
‰
‰
‰
‰
‰
‰
‰
Figure15. Receiver Status menu display
...$ERXWWKH$'3FRXQW
The encrypted and non-encrypted Address Data Packet (ADP) count is continu-
ously monitored by the receiver. The information displayed on-screen for each
packet type indicates how much of the transmitted packet information is being
accurately received and processed by the receiver. Under ideal conditions, both of
the displayed figures are (nearly) identical. To assist with monitoring your re-
ceiver's performance, you can clear or reset the ADP count to zero (0) at any time
using the Reset ADP option. The ADP count is also reset each time the receiver is
switched ON.
To reset the ADP count…
Step 1.
Reset ADP
Repeat the above actions to reset the ADP count.
Advertisement
