Download Print this page

Scientific Atlanta D9225 Installation And Operation Manual page 24

Advertisement

$OW0RGHRSHUDWLRQ
Setting up your Headend Satellite Receiver via the Alt Mode interface requires
setup of frequency-related and other options. These settings are used by the re-
ceiver for locking onto the signal, and for optimizing receiver performance. Some
menu interface functions are also available via the Alt Mode interface. For a sum-
mary of Alt Mode functions, see Table 4.
...$ERXW$OW0RGHV
While viewing any channel, you can use Alt Mode functions to view the current
receiver setup, or you can view or change the current setup from the Installer
Channel. Alt Mode functions are available via receiver front panel buttons. Alt-1
function labels are printed directly on the keypad bezel above each button (see
Figure 4). Alt-2 functions are also associated with front panel buttons, except that
the function names are not printed on the keypad bezel (see "...About entering
numbers using front panel buttons"). As with the menu interface, access to Alt
Mode functions is controlled by system Lock Levels and the security Password.
More information about Lock Levels and the Password is contained in this section.
Complete information about how each of the Alt-1 and Alt-2 functions are used to
set up the receiver is contained in this section.
To operate the receiver in Alt-1 Mode
Step 1.
While the receiver is operating in Alt-1 Mode, the ALT LED flashes ON and OFF,
and only Alt-1 functions are available via front panel buttons. Pressing ALT twice
(or pressing VIEW) returns the receiver to normal operation (i.e., the ALT LED is
OFF).
To operate the receiver in Alt-2 Mode
Step 1.
 
...
...
Figure6. Front panel Alt-1 and Alt-2 Mode function buttons
While the receiver is operating in Alt-2 Mode, the ALT LED is ON, and only Alt-2
functions are available. Pressing ALT once (or pressing VIEW) returns the receiver
to normal operation (i.e., the ALT LED is OFF).
To change a receiver setting (Alt Mode)…
Step 1.
Step 2.
Step 3.
After changing a receiver setting you can…
Save:
1
Restore:
2
Cancel:
3
Ï
Ð

Advertisement

loading