Advertisement
0
)
NH\SDG
8/7,
81&7,21
The multi-function keypad includes the
SELECT button. Use the arrow buttons and the SELECT button to operate the on-
screen menus. The arrow buttons are found on the receiver front panel together
with the SELECT button. You use the SELECT button separately to make selections
from on-screen menus, and together with the arrow buttons to perform special
functions (see also "Front panel controls & display").
While viewing any channel you can use the
Í
Î
or lower) channels, and the
/
ume level, respectively. Note that
only (see also "C
channels" and "C
HANGING
To use the arrow buttons and the SELECT button…
Ï Ð
Í Î
SELECT
1
NH\SDG
80(5,&
While viewing any channel you can use the front panel buttons to change the cur-
rent receiver setup by switching from normal receiver operation to one of two (2)
alternate operating modes (i.e., Alt Mode-1 and Alt Mode-2). For more information
about Alt Modes, see "Setting up the receiver".
While in normal operating mode (i.e., front panel ALT LED OFF), you can use the
front panel numeric keypad to change any channel from 001 through 999, or to
enter information for menu options (see "Setting up the receiver").
To use the numeric keypad (normal mode operation)…
0
9
To use the numeric keypad (Alt Mode operation)…
ALT
VIEW
Ï
Ð
Í
Î
,
,
and
arrow buttons and the
Ï
Ð
/
arrow buttons to display (higher
arrow buttons to increase or decrease the vol-
Ï
Ð
/
arrow buttons control available channels
the volume").
HANGING
Use the VIEW button to return to normal receiver operation from Alt Mode. Other
Alt Mode functions are also available via the front panel. For complete information
about viewing or changing the current receiver setup using Alt Mode functions,
see "Alt Mode operation".
6
&
VORW
0$57
$5'
Security and/or preauthorized satellite broadcast services upgrades via Smart
Card are planned in future for the PowerVu Headend Satellite Receiver.
&
FKDQQHOV
+$1*,1*
While viewing any channel you can change channels (higher or lower) one channel
at a time. Channels are changed (higher or lower) depending on which button is
pressed.
To change channels…
Ï
Ð
Channels can also be changed directly by pressing the numbered front panel but-
tons (e.g., to change to channel 5, press 0005, or press 5 and then SELECT).
&
WKHYROXPH
+$1*,1*
While viewing any channel you can increase or decrease the volume level. The
volume level is increased or decreased depending on which button is pressed.
To change the volume…
Í
Î
Advertisement
