...$ERXWWKH3DVVZRUG
A unique Password (4-digit number) protects the current receiver settings against
unauthorized changes. When changing the Password, record and keep this num-
ber in a secure location. The default password provided is...
Default Password
1 2 3 4
It is recommended that you change the default Password to a different Password
when the receiver is first installed, and periodically afterward, as required.
To change the Password
Step 1.
Password
Step 2.
Step 3.
Step 4.
Step 5.
1
Displays subtitle text in the selected language (from a pre-defined language
group)
2
Other languages (defined at uplink) may also be available for selection, depend-
ing on your network or jurisdiction
Table7. Available video subtitle languages
Language
...$ERXWIDFWRU\GHIDXOWV
The Factory Reset option is used for resetting the receiver to factory default set-
tings, including the Password. When activated, the current receiver settings are
Í Î
replaced by the default settings (see Table 8). After the factory defaults are re-
stored, you can make any changes, as required. Current receiver settings can be
replaced at any time.
To restore the factory default settings
After selecting the Factory Reset option you can
Restore factory defaults:
Cancel:
If no Remote Control is available, you can perform the these functions using the
following front panel buttons.
Language
Language
Factory Reset