Advertisement
Step 5.
Available options: Press 1 to save the new settings (Yes), or press 2 to discard all
changes (No), or press 3 to cancel the operation (Cancel).
Repeat this action to change the Lock Level setting. Menu options appear grayed-
out if disabled by the current Lock Level setting.
To display the Main Menu (if Lock Level 3 set)…
Step 1.
MENU
Step 2.
current P assword
To set the Baud Rate (for external remote operation)…
Step 1.
Baud Rate
Step 2.
Step 3.
Available options: Press 1 to save the new settings (Yes), or press 2 to discard all
changes (No), or press 3 to cancel the operation (Cancel).
Repeat this action to change to another baud rate. If you are unsure about which
baud rate to use, contact your dealer/reseller, or local service provider.
«$ERXWWKH$VSHFW5DWLR
The Aspect Ratio setting displayed at the User Setup menu is preset at the factory
to Normal for viewing programming broadcast in 4 X 3 format on your TV moni-
tor, and cannot be changed. If enabled at the uplink, a Wide Aspect Ratio setting
lets you view programming broadcast in 16 X 9 format on your TV monitor. For
more information, contact your dealer/reseller, or local service provider.
«$ERXWWKHORFDOWLPH
Current day, date and time information is displayed at the top of each menu. Time
information is normally broadcast as part of the transmitted digital signal, and is
usually the broadcaster local time relative to GMT
not your local time, you must change this time setting. Time information is dis-
played in the following format.
Day 00/00/00 00:00AM
1
Greenwich Mean Time
1
. If the current broadcast time is
Advertisement
