Advertisement
2QVFUHHQPHQXRSHUDWLRQ
Setting up your Headend Satellite Receiver via the menu interface requires setup of
frequency-related and other options. These settings are used by the receiver for
locking onto the signal, and for optimizing receiver performance. Most menu inter-
face functions are also available via the Alt Mode interface.
While viewing any channel, you can display on-screen menus to view or change
the current receiver setup. Menu interface functions are available via receiver front
panel buttons. As with the Alt Mode interface, access to menu functions is con-
trolled by system Lock Levels and the security Password. More information about
Lock Levels and the Password is contained in this section.
...$ERXWRQVFUHHQPHQXRSHUDWLRQ
While viewing any channel, you can display on-screen menus for viewing or
changing the current receiver setup. Using the menu interface, you can change the
current receiver settings, and/or display other menus. Some menus contain setup
information which is available for viewing only, and cannot be changed. Num-
bered menu options are used to display other menus. Access to menus and
changeable menu options is controlled by system Lock Levels and a security Pass-
word. For more information about Lock Levels and the Password, see "Setting up
the receiver (see also "User Setup").
To display on-screen menus
...
Step 1.
MENU
Step 2.
For more information about the Password, see "...About the Password" (see also
"Setting up the receiver").
C/Ku
FEC
S.Q.
1
2
3
FRQ
SYM
SIG
4
5
6
FRQ
POL
AFC
7
8
9
0
A LT
V IE W
Figure11. Front panel keypad showing Alt-1 functions
SE LEC T
Advertisement
