Advertisement
‰
Restore factory defaults:
‰
Cancel:
...$ERXWWKH,55HPRWH&RQWURO
The IR Remote option is used for enabling or disabling Remote Control capability.
When enabled (ON), you can operate the receiver using Remote Control or front
panel buttons. When disabled (OFF), you can only use the front panel buttons to
operate the receiver (no response to any Remote Control buttons pressed). You can
enable or disable Remote Control operation at any time.
The IR Remote Control is not supplied with the Headend Satellite Receiver, but can
be purchased separately (specify S-A part #760-216). To order, contact your
dealer/reseller or local service provider, or your local Scientific-Atlanta Customer
Support Center (see "Appendix D Customer information").
To enable or disable Remote Control operation…
Step 1.
IR Remote
Step 2.
Available options: Press 1 to save the new settings (Yes), or press 2 to discard all
changes (No), or press 3 to cancel the operation (Cancel).
Í
Î
Ï
Ð
Table8. Factory default settings
Option
Menu
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
Default setting
Advertisement
