Specifications - Napa Technology Pristine PLUS CX User Manual

Appendix – Product
Dimensions & Weight (4-bottle unit: SX, MX, EX,
Single System Width:
Single or Multi System Height:
Single or Multi System Depth:
Single System Weight:
* Note: The WineStation modular design allows for the creation of larger designs in 4-bottle configuration.
For example, 8 bottle and 12 bottle models are comprised of two and three 4- bottle units, respectively.
Cooling & Electrical
* Note: WineStation is shipped with leveling feet attached to the bottom of the unit. These leveling feet are
set to a minimum of 1 inch height. The height can be increased, but not decreased. The warranty is void if
the leveling feet are removed. *Cooling can be effected by peripheral conditions and air circulation.
Required Clearances for Stand-Alone Installation:
Top:
Sides:
Back:
Bottom:
Operating Ambient (Room)
Temperature
Internal (Wine Cabinet) Temperature
Rating
Ventilation
Electrical Input
Napa Technology Customer Support 800.603.6550

Specifications

HX)
19.6" – 49.76 cm
25.58" – 64.87 cm (including 1" for leveling feet)
16" – 40.44 cm
85 lbs – 38.55 kg (when empty)
2" – 5.08 cm
No clearance required
2.5" – 6.35 cm clearance for power and tubing access
recommended, not required.
1" – 2.54 cm
Min 50°F – 10°C
Max 80°F – 26.7°C
Approx. 25°F to 32°F – 10°C to 0°C*
IPXO (indoor or covered use only)
2" – 5.08 cm top venting required for Built-In or Cabinet
North America 115Vac 10A 50-60Hz
Europe 230Vac 10A 50-60 Hz
Page 27