Napa Technology Pristine PLUS CX User Manual page 11

Unpacking and Installing your
2. Connecting the Gas Cylinder.
a. Remove the plastic cap from the gas tank.
b. Find t he g as r egulator a ssembly t hat c omes w ith t he s ystem. M ake s ure t he r egulator
adjustment k nob i s t urned a ll t he w ay i n t he O FF d irec9on.
c. Insert the top of the gas cylinder into the bottom of the gas regulator assembly
and turn it clockwise, by hand, until it is snug. Do not use a wrench or over tighten.
d. Turn the regulator knob in the ON direction until it stops.
c. Position the Gas Cylinder onto the rear of the WineStation and utilizing the
Velcro strap, secure the cylinder to the rear of the WineStation. Plug the hose
end from the regulator into the Gas connector located on the Rear of the
WineStation. (Note: If the WineStation will be positioned or mounted such that
the Gas Cylinder will not be accessible from the rear, an extension Gas hose is
provided so that the Gas Cylinder can be externally positioned. Use the
extension hose to plug into the WineStation and plug the other end of the
extension hose into the regulator hose. Make sure that the gas cylinder is safely
secured at the location where it will reside.)
Note: Gas Connectors are all quick disconnects and when "Grey" button is pressed will
"pop-off" and maintain the gas pressure in the WineStation and the hoses.
Napa Technology Customer Support 800.603.6550
Regulator
Assembly
Velcro
Strap
Tank c an s it o n t able
WineStation(s)
Gas c ylinder
Can b e s ecured
With V elcro S trap
Page 11