Table of Contents
Advertisement
LFF6020
Parameters/
Setup
You can setup your machine as you like depending on the
use. You will find in this chapter description of the
functions.
You can print the functions guide and the available setup
of your multifunction machine.
Your machine is continuously being
updated, new functions are regularly
made available.
To
benefit,
www.sagem-communications.com. You
Note
can also use the update function
available with the Companion Suite Pro
software to download the latest online
updates
page 48).
Language
This setting enables you to choose the menu language of
your choice. By default, the multifunction machine is set
to English.
To select the language:
203 - SETUP / GEOGRAPHICAL / LANGUAGE
1 Press
, enter 203 using the keypad.
2 Select the required language using
press the OK key to confirm.
3 To exit this menu, press
visit
our
website
(see
Firmware
update,
and
, then
.
Technical Parameters
As delivered your machine is preset by default. However,
you may adjust it to meet your requirements by resetting
the technical parameters.
To set the technical parameters:
1 Press
, enter 29 using the keypad.
2 Select the desired parameter and confirm with OK.
3 With the keys
settings by following the table below and press OK.
Parameter
8 - Eco energy
Choosing the printer standby
delay: the printer will switch to
standby after a delay (in minutes)
of NON-operation or during the
period of time of your choice.
Note: you can also access this
parameter by pressing the
80 - Toner save
Makes printing lighter to save toner
cartridge ink.
RAW network print port
90 - RAW Port
connection.
Time-out before document being
91 - Printer error
timeout
printed is deleted following a print
error in PC print mode.
92 - Printer wait
Wait time-out for data from PC
timeout
before the task is deleted in PC
print.
93 - Replace format
Page format change. This
parameter allows you to print a
LETTER format document on A4
pages using the LETTER/A4
setting.
Number of WEP keys allowed
96 - NBR. WEP
Keys
(from 1 to 4).
- 22 -
29 - SETUP / TECHNICALS
or
, modify the parameter
Signification
key from the idle screen.
Advertisement
Table of Contents
