Referring To Or Changing Your Network Parameters - Philips LASERMFD LFF 6020 User Manual

Philips multi-function printer user manual
Hide thumbs

Advertisement

Table of Contents
LFF6020
8 IP CONF.: MANU or IP CONF.: AUTO appear on
the screen.
If you choose to set up the system manually, go to
the next paragraph and enter the parameters
IP ADDRESS, SUBNET MASK and GATEWAY.
9 At the end of this procedure, you return to the main
menu of CONFIG. ASS.
10 Exit this menu by pressing the
Once the network has been set up, the LED of the WLAN
USB key should be on.
Referring to or changing your
network parameters
Each of the parameters of your network may be changed
as your network develops.
2822 - SETUP / WLAN / PARAMETERS / IP
1 Type in
, select the menu SETUP using the keys
or
and confirm with OK.
2 Select WLAN using the keys
with OK.
3 Select PARAMETERS using the keys
confirm with OK.
4 Select IP ADDRESS using the keys
confirm with OK.
5 The number of your IP address will appear in the
format 000.000.000.000. Enter the new IP address
for your machine in the format displayed and
confirm with OK.
6 Exit this menu by pressing the
2823 - SETUP / WLAN / PARAMETERS / SUBNET
1 Type in
, select the menu SETUP using the keys
or
and confirm with OK.
2 Select WLAN using the keys
with OK.
3 Select PARAMETERS using the keys
confirm with OK.
4 Select SUBNET MASK using the keys
confirm with OK.
5 The number of your subnet mask will appear in the
format 000.000.000.000. Enter the new submask
of your machine in the format displayed and
confirm with OK.
6 Exit this menu by pressing the
2824 - SETUP / WLAN / PARAMETERS / GATEWAY
1 Type in
, select the menu SETUP using the keys
or
and confirm with OK.
2 Select WLAN using the keys
with OK.
3 Select PARAMETERS using the keys
4 Select GATEWAY using the keys
5 The number of your gateway will appear in the
key
.
6 Exit this menu by pressing the
1 Type in
2 Select WLAN using the keys
3 Select PARAMETERS using the keys
ADDRESS
4 Select SSID using the keys
5 The name of your network will appear on the
or
and confirm
6 Exit this menu by pressing the
or
and
or
and
1 Type in
2 Select WLAN using the keys
key
.
3 Select PARAMETERS using the keys
4 Select MODE using the keys
MASK
5 The symbol >>, tells you that your network is in
6 Select one of the modes and confirm with OK.
or
and confirm
or
and
or
and
7 Exit this menu by pressing the
key
.
or
and confirm
- 28 -
confirm with OK.
confirm with OK.
format 000.000.000.000. Enter the new gateway
for your machine in the format displayed and
confirm with OK.
2825 - SETUP /WLAN / PARAMETERS / SSID
, select the menu SETUP using the keys
or
and confirm with OK.
with OK.
confirm with OK.
with OK.
screen. Enter the new name of your network and
confirm with OK.
2826 - SETUP / WLAN / PARAMETERS / MODE
, select the menu SETUP using the keys
or
and confirm with OK.
with OK.
confirm with OK.
with OK.
active mode.
-
If you choose the AD-HOC MODE, the sub-
menu CHANNEL will appear; enter a number
between 1 and 13 (1 to 11 for the US) and
confirm with OK.
In an AD-HOC network, the devices
communicate directly with each
other without passing through an
access point. The speed of
communication across the whole
AD-HOC radio network is as fast as
Important
the weakest connection in the
network. The speed of
communication is also dependent on
spatial distance between transmitter
and receiver, as well as the number
of barriers, such as walls or ceilings.
or
and
or
and
key
.
or
and confirm
or
and
or
and confirm
key
.
or
and confirm
or
and
or
and confirm
key
.

Advertisement

Table of Contents
loading

  Also See for Philips LASERMFD LFF 6020

  Related Manuals for Philips LASERMFD LFF 6020

This manual is also suitable for:

Lff6020w/gbbLff6020/gbb

Table of Contents