Knock Sensor - Subaru forester 2001 Service Manual

Fuel Injection (Fuel Systems)

7. Knock Sensor

A: REMOVAL
S185042A18
1) Disconnect battery ground cable from battery
ground terminal.
2) Remove intercooler.
TURBO)-10, REMOVAL, Intercooler.>
3) Disconnect knock sensor connector.
4) Remove knock sensor from cylinder block.
KNOCK SENSOR
S185042
G6M0095
<Ref. to IN(DOHC
B2M4262
S2M1673
FU(DOHC TURBO)-32
B: INSTALLATION
1) Install knock sensor to cylinder block.
Tightening torque:
24 N·m (2.4 kgf-m, 17.4 ft-lb)
NOTE:
The extraction area of the knock sensor cord must
be positioned at a 60° angle relative to the engine
rear.
2) Connect knock sensor connector.
3) Install intercooler. <Ref. to IN(DOHC TURBO)-
10, INSTALLATION, Intercooler.>
4) Connect battery ground cable.
S185042A11
H2M3511C
B2M4262
G6M0095