IBM RS/6000 7043 43P Series Service Manual page 131

Table 4-2 (Page 2 of 2). Bus SRN to FRU Reference Table
SRN Bus
Identification
Note: If a network adapter, or the I/O board is replaced, the network administrator must be notified
so that the client IP addresses used by the server can be changed. In addition, the operating system
configuration of the network controller may need to be changed in order to enable system startup.
Also check to ensure that any client or server that addresses this system is updated.
Possible Failing Device and AIX
Location Code
Tablet port/device (01-FF)
Chapter 4. Error Code to FRU Index for the Model 150
Associated
FRU
I/O board. (See
note at the
bottom of this
table.)
4-13