IBM RS/6000 7043 43P Series Service Manual page 120

Table 4-1 (Page 2 of 11). Firmware Error Codes
Error Code Function /
Description
20D0000F Selftest failed on
device, no
error/location code
information available
20D00010 Selftest failed on
device, can't locate
package
20D00011 Replace riser card.
Security
20E00000 Power on Password
entry error
20E00001 Privilege Password
entry error
20E00002 Privilege Password
Jumper not enabled
20E00003 Power on Password
must be set for
Unattended mode
20E00004 Battery drained or
needs replacement
20E00005 EEPROM locked
20E00008 CMOS corrupted or
tampering evident,
CMOS initialized
20E00009 Invalid password
entered - system
locked
20E0000A EEPROM lock
problem
20E0000B EEPROM write
problem
4-2
7043 43P Series Service Guide
Repair Action/Possible Failing FRU
Check the SMS error log entry for this error code. The
location code (if present) in the error log entry should
identify the location of the failing device.
Software Error (Contact your service representative for
assistance.)
Swap the old VPD module from the old riser card to
the new one rrective actions
The password has been entered incorrectly.
Retry installing the password.
The password has been entered incorrectly.
Retry installing the password.
The Privileged Password jumper is not in the correct
position for password initial entry.
Consult the system's User's Guide for pin location and
jumper position.
Unattended mode requires the setting of the Power On
password before it is enabled.
1. Replace battery
2. Replace System Planar
1. Power Off/On machine
2. Replace System Planar
Check your machine for evidence of tampering
If NO tampering:
1. Replace battery, restore NVRAM data (passwords,
startup data)
2. Replace System Planar
The password has been entered incorrectly 3 times.
Power Off/On the machine and enter the password
correctly
If for PAP install, is jumper in correct position?
Consult the system's User's Guide for pin location and
jumper position.
1. Power Off/On machine
2. Replace System Planar
1. Power Off/On machine
2. Replace System Planar