IBM RS/6000 7043 43P Series Service Manual page 121

Table 4-1 (Page 3 of 11). Firmware Error Codes
Error Code Function /
Description
20E0000C EEPROM read
problem
20E00017 Cold boot needed
for password entry
Informational
20EE0003 IP parameter
requires 3 dots "."
20EE0004 Invalid IP parameter
20EE0005 Invalid IP parameter
(>255)
20EE0006 No SCSI controllers
present
20EE0007 Keyboard not found
20EE0008 No configurable
adapters found in
the system
Repair Action/Possible Failing FRU
1. Power Off/On machine
2. Replace System Planar
Power Off/On machine
Enter valid IP parameter
Example: 000.000.000.000
Enter valid (numeric) IP parameter
Example: 000.000.000.000
Enter valid (numeric) IP parameter in the range of 0 to
255
Example: 255.199.002.000
The System Planar should always have (at least) the
2 integrated PCI SCSI controllers
1. Replace System Planar
1. Plug in keyboard
2. Replace System Planar
This warning occurs when the selected SMS function
cannot locate any devices/adapters supported by the
function. If a supported device is installed:
1. Replace the device or adapter
2. Replace System Planar
Chapter 4. Error Code to FRU Index for the Model 150
4-3