IBM RS/6000 7043 43P Series Service Manual page 123

Table 4-1 (Page 5 of 11). Firmware Error Codes
Error Code Function /
Description
21A00001 Test Unit Ready
Failed - hardware
error
21A00002 Test Unit Ready
Failed - sense data
available
21A00003 Send Diagnostic
Failed
21A00004 Send Diagnostic
Failed - DevOfl cmd
21E00xxx SCSI Tape
21ED0xxx SCSI Changer
21EE0xxx Other SCSI device
type
21F00xxx SCSI CDROM
21F20xxx SCSI Read/Write
Optical
Network Controller problem
22000001 Internal wrap test
failed.
22001001 Internal wrap test
failed.
22010001 Adapter failed to
complete hardware
initilization.
22011001 Adapter failed to
complete hardware
initilization.
22020001 Adapter failed to
complete hardware
initilization.
Memory Controller problem
25000000 Memory controller
failed
Flash Update problem
Repair Action/Possible Failing FRU
Refer to SCSI device error notes above
1. Replace SCSI device
2. Replace SCSI cable
3. Replace SCSI controller
Refer to SCSI device error notes above
1. Replace Media (Removable media devices)
2. Replace SCSI device
Refer to SCSI device error notes above
1. Replace SCSI device
Refer to SCSI device error notes above
1. Replace SCSI device
Refer to 21A00xxx error codes for a description and
repair action for the specific "xxx" value.
Refer to 21A00xxx error codes for a description and
repair action for the specific "xxx" value.
Refer to 21A00xxx error codes for a description and
repair action for the specific "xxx" value.
Refer to 21A00xxx error codes for a description and
repair action for the specific "xxx" value.
Refer to 21A00xxx error codes for a description and
repair action for the specific "xxx" value.
Replace the card.
Replace the card.
Replace the card.
Replace the card.
Replace the card.
Replace System Planar
Chapter 4. Error Code to FRU Index for the Model 150
4-5