Table of Contents
Advertisement
4.11.4 Reboot settings
Click the icon
to reboot.
4.12
Date & Time
You can select one of the following methods to enter Date & Time configuration:
Mode 1: In the main screen, press "Menu" key on the hard keyboard-> System
Settings-> Date & time.
Mode 2: In the main screen, tap
-> Settings-> Date & time.
Mode 3: Drag down the status bar,click SETTINGS icon
-> Date &
time. The configuration page is shown as below:
If you want to manually set the date and time, firstly, remove the click "Automatic
data & time", and then set the date, time, select a time zone. Check Use 24-hour
format, and then "1:00 PM" will change to "13:00".
Click "Set date", pop-up date set interface, as shown below:
Advertisement
Table of Contents
