4.2.2 Configuring DHCP
You can select one of the following methods to enter the DHCP configuration:
Mode 1: In the main screen, press "Menu" key on the hard keyboard-> System
Settings-> Wireless & Networks-> Ethernet-> uncheck Using static IP.
Mode 2: In the main screen, tap
Ethernet -> uncheck Using static IP.
Mode 3: Drag down the status bar, click SETTINGS icon
& Networks-> Ethernet-> uncheck Use static IP.
Mode 4: In the main screen, tap
Configuration page is shown as below
Note:
1) If DHCP acquired IP, it will display dynamic IP address information on the location
of static IP configuration, cannot be modified, and there is a item of Use static DNS at
the bottom the alternative DNS server, when checked, you can modify the primary
DNS address and Secondary DNS address.
2) If DHCP is failed, the IP address will show as: 0.0.0.0.
4.2.3 Configuring PPPOE
-> Settings-> Wireless & Networks->
->Network Settings->Access Mode->DHCP.
->Wireless