Configuring Static Ip - Denwa Communications DW-820 User Manual

4.2.1 Configuring Static IP

You can select one of the following methods to enter the static IP configuration:
 Mode 1: In the main screen, press "Menu" key on the hard keyboard-> System
Settings-> Wireless & Networks-> Ethernet- > Using static IP.
 Mode 2: In the main screen, tap
Ethernet -> Using static IP.
 Mode 3: Drag down the status bar from the right side, click SETTINGS
->Wireless & Networks-> Ethernet->Use static IP.
 Mode 4: In the main screen, tap
IP.
Configuration page is shown as below
Configuration parameters specification
Parameter
IP address
Subnet Mask
Default Gateway
DNS Server
Alternative DNS Server
-> Settings-> Wireless & Networks->
->Network Settings->Access Mode->Static
Specification
set the IP address of the device
set the subnet mask of the device
set the default gateway
set the DNS address
set the backup DNS address