Configuring Wi-Fi - Denwa Communications DW-820 User Manual

2) Enter the correct user name and password of PPPOE
Note:
1) After dialing, can display the acquired IP address, server IP, the primary DNS,
Secondary DNS information, status as connected
2) Not Dial, IP address information will be 0.0.0.0
3) There is a redial entry under Alternate DNS, click redial, then re-launch a PPPOE
dial-up process, re-dial.

4.2.4 Configuring Wi-Fi

You can select one of the following methods to enter the Wi-Fi configuration:
 Mode 1: In the main screen, press "Menu" key on the hard keyboard-> System
Settings-> Wireless & Networks-> Ethernet- >Wi-Fi.
 Mode 2: In the main screen, tap
Ethernet -> Wi-Fi.
 Mode 3: Drag down the status bar, click
Configuration page is shown as below
-> Settings-> Wireless & Networks->
on the status bar.