Installing The Battery Holder - Ikan Beholder MS-PRO Instruction Manual

Installing the Battery Holder

Instructions to use the battery holder
Mount the 18650 batteries with the negative electrode of the battery (-) towards the spring (Fig. 2). Push the three
18650 batteries inward.
Install the battery holder into the battery compartment with the two electrical terminals toward the direction of
insertion (Fig. 3)
WARNING
Before starting the gimbal, make sure the camera is properly mounted on the stabilizer and perfectly
balanced.
Fig. 2. Inserting batteries into the battery holder
Fig. 3. Inserting the battery holder into gimbal handle
2016 Beholder ® All Right Reserved
7
▲