Production Introduction; Battery Setup - Ikan MS1 Quick Start Manual

Production Introduction

The Beholder MS1 Camera Stabilizer is designed to support professional videographers of all levels.
The stabilizer is easy to use and small enough to travel with. The Beholder MS1 Stabilizer is intuitive and
offers a greater range of camera movement.

Battery Setup

A. Battery Setup
a.) Install the batteries positive side up into the battery holder. Connect the Micro USB AC Adapter.
Battery Charging time is about 4-5 Hours.
Green light means fully charged. Red light means charging.
Flashing Red and Green lights means almost fully charged.
b.) WARNING! Using a charger that does not support 1.5 Amp or more will result in batteries
failing to charge.
B. Battery Holder
a.) Identify the positive side of the battery holder.
b.) Insert the Battery Holder into handle, positive side first.
c.) Screw on the battery cap and make sure the cap is secured snuggly.
1. Production Introduction
The Beholder MS1 Camera Stabilizer is designed to support professional videographers
of all levels. The stabilizer is easy to use and small enough to travel with. The Beholder
MS1 Stabilizer is intuitive and offers a greater range of camera movement.
2. Battery Setup and Charging
A Battery Setup
a. Install batteries positive side up into battery holder.Connect the Micro USB
cable to the Battery Holder Micro USB port. Connect USB cable to 1.5-2
amp power supply.
b. Battery Charging time 4-5 hours.
c. Green light means fully charged. Red light means charging. Flashing Red
and Green lightsmeans almost fully charged.
d. Warning using a charger that does not support 1.5-2 amps will result in
batteries failing to charge.
B Battery Holder
a. Battery Holder positive side up.
b. Insert Battery Holder into handle, positive side first.
A Battery Setup
a. Install batteries positive side up into battery hold
cable to the Battery Holder Micro USB port. Con
amp power supply.
b. Battery Charging time 4-5 hours.
c. Green light means fully charged. Red light mean
and Green lightsmeans almost fully charged.
d. Warning using a charger that does not support 1
batteries failing to charge.
B Battery Holder
a. Battery Holder positive side up.
b. Insert Battery Holder into handle, positive side fir
Page 2