Camera Installation And Balance - Ikan Beholder MS-PRO Instruction Manual

3-axis handheld stabilizer gimbal

Hide thumbs Also See for Beholder MS-PRO:

Table of Contents

Camera Installation and Balance

WARNING

Before installing the camera and adjusting the balance, remove the camera lens cover, attach the lens

hood, and insert a memory card and camera batteries, as well as any other accessories. The camera should

be fully ready to shoot.

STEP 1

Mount the camera quick release

• Remove the quick release plate from the gimbal.

• Attach the quick release plate to the camera (Fig. 4). Be careful not to twist it too tight at this point.

• Make sure the quick release plate direction is facing forward toward the lens.

Fig. 4. The camera is attached to the quick release plate

▲

Table of Contents