Advertisement
Quick Links
PT4900S-PEDESTAL
19" SDI Teleprompter, Pedestal & Dolly Turnkey
OVERVIEW
Ikan's Turnkey Broadcast Solutions include everything you need for your professional camera setup. This solution includes a 19" teleprompter,
pedestal, and dolly. All of our systems have been tested internally for payload compatibility.
The remaining payload capacity, after mounting the full 19" teleprompter, can accommodate camera setups up to 38.8 lbs. The pedestal,
without the teleprompter system, can accommodate cameras up to 61.7 lbs. This solution also includes a hard case for the pedestal and a
carrying bag for the dolly.
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
Quick Start Guide
Advertisement
Related Manuals for Ikan PT4900S-PEDESTAL
Summary of Contents for Ikan PT4900S-PEDESTAL
- Page 1 19” SDI Teleprompter, Pedestal & Dolly Turnkey OVERVIEW Ikan’s Turnkey Broadcast Solutions include everything you need for your professional camera setup. This solution includes a 19” teleprompter, pedestal, and dolly. All of our systems have been tested internally for payload compatibility.
- Page 2 PT4900-SDI 19” Professional High Bright Beam Splitter Teleprompter with 3G-SDI What’s Included Large Riser DSLR/Mirrorless Riser Medium Riser Bottom Plate Base Glass Frame Holder Bracket Glass w/ Rod Clamps Hood Attachment Frame Glass Holder Hood Glass Frame Screws 15mm Rod Clamps 15mm Rods Large Riser Bracket...
- Page 3 Teleprompter Assmebly Setup Step 1 Step 2 Place the Hood Attachment Frame over the Glass Holder. Then place the Secure the Glass Holder by fastening the knurled nuts to the screws as glass against the Glass Holder. Make sure the screws pass through the pictured below.
- Page 4 Step 5 After the monitor mounts are attached, adjust the 15mm rods to accommodate the monitor. Leave about 1 inch of room for the teleprompter bracket. Make sure the 15mm rods go through both set of monitor mounts. Please ensure that all screws are properly tightened after inserting the monitor. *SAFETY NOTE* Make sure to leave at least 2 inches of the rods inside the teleprompter base.
- Page 5 Step 8 Fold the flaps of the Hood alongside the edges of the Hood Attachment Frame. The flaps of the Hood are magnetic so they will automatically attach. Step 9 To prevent light from leaking through the hood, seal both zippers down. www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com...
- Page 6 Step 10 Slide in the Riser plate of your choice by aligning the screws on the riser plate to the slot on the Base. Once the screws are aligned, Slide the riser plate into the Base. Step 10 Slide in the Riser plate of your choice by aligning the screws on the riser plate to the slot on the Base. Once the screws are aligned, Slide the riser plate into the Base.
- Page 7 Step 12 Mount your own tripod plate to the bottom plate by aligning the 1/4-20 and/or 3/8-16 screws and fastening them to the Bottom Plate. It is recommended that you connect your tripod plate to front of the Bottom Plate so that you can balance your teleprompter easier. Once your tripod plate is connected to the Bottom Plate, mount the tripod plate to your tripod head.
- Page 8 Step 15 To secure your teleprompter system, insert the included headless screws into the threads behind and in front of the Base. Step 16 The headless screws should be inserted to the threads as pictured below. www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com...
-
Page 9: Monitor Ports
Monitor Ports Monitor Menu Settings Video Config Contrast (White Level) Brightness (Black Level) Tint (Chroma Hue) Chroma (Chroma Saturation) Sharpness (Detail) RGB Setup – Manually configure RGB Return System Config Menu Duration – Set duration of how long menu stays on screen Video Ratio –... -
Page 10: Specifications
Watch our VIDEO TUTORIAL on how to assemble Ikan Professional Telepromopters https://youtube.com/playlist?list=PLcjaK5n9Y8ctrbYS3t2g4nyx2uADOXjuF Specifications PT4900-SDI Aspect Ratio Backlight Brightness 1000 nits Build Material Aluminum Chassis Diagonal 19” Input Signal 3G-SDI, HDMI, and VGA inputs Input Voltage DC 12v / 4A Power Consumption Reading Range 25’... -
Page 11: Learn More
Foam Case To make your teleprompter more portable, we packed it in a reusable, high-quality foam. The shape and size of the foam was designed to fit into Ikan’s PT-CASE-V2. ** DO NOT THROW AWAY FOAM CASE ** Learn More More dynamic information at official website: www.ikancorp.com... - Page 12 EP880SK Pedestal 182.0cm 3.0-28.0kg 71.7in 6.6-61.7lbs 28.5kg 102.5cm 182.5in 15.0lbs 38.0cm 100mm 15.0in Component: Fluid head GH25 Pedestal EP880S Dolly EI7007 Pneumatic column Air-pressure in the pedestal system pneumatic column can be adjusted 165.5cm Fluid head with Double-wheel 125mm Extendable column casters with adjustable 100mm ball Standard kit...
- Page 13 GH25 100mm Fluid Head 160mm/6.3in 73mm/2.9in 100mm 3.0-28.0kg 203mm/8.0in 6.6-61.7lbs 1-15 FEATURES 7 plus 0 grades of pan & llluminated leveling bubble 15 steps of counterbalance Additional standard 1/4" & tilt drag 3/8" screw holes SPECIFICATIONS Model GH25 Payload Range 3.0-28.0kg / 6.6-61.7lbs Counterbalance Range 1-15...
- Page 14 EP880S Pedestal 165.0cm 30.0kg 65.0in 66.1lbs 86.0cm 23.9kg 33.9in 52.7lbs 38.0cm 100mm 15.0in Component: Pedestal EP880S Dolly EI7007 Pneumatic column Air-pressure in the pedestal system pneumatic column can be adjusted 165.5cm Ergonomic hand Double-wheel 125mm Extendable column wheel casters with adjustable Standard kit (extra part) High version kit...
- Page 15 EI-7007 Super dolly Designed for pedestal system and other heavy duty system. The 125mm/5inch wheels with cable guard can be individually braked, also the movement direction can be fixed. Folds for transporting. Φ FEATURES 50cm 21.5cm 125mm Pull the knob to extend the dolly, Height : 21.5cm / 8.5in Casters diameter: 125mm / 4.9in.
- Page 16 Pan bar Telescopic pan bar for GH08L, GH10L, GH15, GH25 heads SPECIFICATIONS Length range 405-605mm / 15.9-23.8in Net weight 385g / 0.8lbs...