Gimbal Working Angles; Operable Camera Angles; Precautions; Safety - Ikan Beholder MS-PRO Instruction Manual

3-axis handheld stabilizer gimbal

Hide thumbs Also See for Beholder MS-PRO:

Table of Contents

•

Mirrorless: A6300, A7R2, A7S + 24- 70 / 16- 35, GH4 + 12- 35, GH3 + 14- 140 and so on.

•

Compact cameras: RX100, LX100

Gimbal Working Angles

Handheld camera angle range

Things to consider before use

The Beholder MS-PRO is shipped from the factory with perfect calibration. However, after a long period of unuse or

if the temperature difference is too large, it may cause the gyroscope to drift automatically or to tilt during use.

Gyro Correction:

Place the Beholder MS-PRO horizontally on the table, power on the gimbal and press and hold the menu button for 6

seconds. The system automatically enters the gyroscope calibration mode. The motors lose power for 5 seconds. After

that, the automatic system calibration is complete and the stabilizer can resume normal use.

Note:

1. During the calibration process, hold the gimbal handle on the table as stable as possible.

2. The mini USB port is designed only for a wired joystick and can't be used for charging.

3. In order to obtaina better shooting experience in the use of MSPRO when shooting, avoid any collision

and do not use excessive force.

Important safety instructions

1. Do not get too close to a magnetic field or the source of extreme heat and fire.

▲

Table of Contents