1. Introduction
The Beholder MS1 Camera Stabilizer is designed to support professional videographers
of all levels. The stabilizer is easy to use and small enough to travel with. The Beholder
MS1 Stabilizer is intuitive and offers a greater range of camera movement.
2. Battery Setup and Charging
A. Battery Setup
a. Install batteries positive side up into battery holder.Connect the Micro USB cable
to the Battery Holder Micro USB port. Connect USB cable to
1.5-2 amp power supply.
b. Battery charging time 4-5 hours.
c. Green light means fully charged. Red light means charging.
Flashing Red and Green lights mean almost fully charged.
d. WARNING: using a charger that does not support 1.5-2 amps will result in
batteries failing to charge.
B. Battery Holder
a. Battery Holder positive side up.
b. Insert Battery Holder into handle, positive side first.
c. Screw on battery cap and make sure the cap is secured snuggly.
Page 2