OLED Display
Extra Features
Extensions and extra features
• 3/8 standard screw holes, connecting rods 1/4 or 3/8 turn screws sold separately.
• Mini USB for controlling the gimbal via wired joystick
• Handle screw for an external monitor and microphone, lights, etc.
• Genuine universal quick release plate Manfrotto 577 series, such as 501PL, 701,etc. 50mm width Quick Edition
Compatible Cameras
Compatible camera models
• The Beholder MSPRO supports lighter than 200-900
smartphones.
• List of supported cameras:
Boot interface with company logo
profile1: Press mode button once: Lock mode
profile2: Press mode button twice: Pan Follow mode
profile3: Press mode button three times: Follow mode
profile4: Press mode button four times: 3-Axis Follow mode
profile5: Press mode button five times: Return to the Home position
Note:
Press and hold the mode button for 6 seconds to start gyro calibration Do not move the
gimbal while callibration is in the process. In case gimbal is moved, please redo the
calibration. Usually the calibration takes about 5 seconds during this time the gimbal
shut off and restart the motors.
2016 Beholder ® All Right Reserved
mirrorless cameras, Gopro cameras, and
gram
14
▲
▲
▲