INTRODUCTION Thank you for purchasing the ikan PT3000 15” Teleprompter. The PT3000 is extremely easy to use and will quickly become an integral part of your production kit. For more information on this and many other innovative ikan products, please visit our website: www.ikancorp.com.
Page 8
1) Fist thing to do is make sure that the monitor of the PT3000 is plugged in powered on and connected to the VGA port of you computer. (It’s the blue 15 pin connector on the back of your computer) 2) The easiest way to set up your computer if you are using a laptop is to use the hot keys.
Page 9
Click on apply. i. You are now ready to start Prompter Pro V.2 (For Step 7) For additional help please call the ikan support team at 713-272-8822 or email us at support@ikancorp.com Office Hours: 9am - 6pm Central Time...
Page 10
Q: I have assembled my PT3000 and I have some parts left over. What do these belong to? A: First, you can double-check the assembly of the PT3000 to verify that each piece is in its correct placement. Then, you can refer to the parts listing. There are two (2) larger pieces included which are “Optional” bracketry and not necessary for the operation of the PT2100.