Table of Contents
Advertisement
Wall Mount Installation - Round Standard ABS Clock - Locally Powered
INSTALL, POWER, AND SET YOUR MASTER CLOCK OR REPEATER BEFORE POWERING THE SECONDARY
WIRELESS CLOCKS
A Sapling Master Clock and any Repeaters must be installed, powered, and set up BEFORE you attempt to set up a wireless clock system. If
the Master Clock and Repeaters are not properly installed and powered, the secondary clocks will not synchronize.
Included in Package
Description
SAL or SALG round Standard ABS
analog clock
Included in Wiring Kit (A-WK-12-1V)
Mounting Bracket
Power/grounding wires
and connector
Bracket securing nut
#10x1.5 Self-tapping screw
Wall anchor
PLEASE NOTE: A user will also have to provide a Phillips-head screwdriver, a small slot-head screwdriver, a drill with a 1/4 inch drill bit, a pencil, a single
gang box, any equipment needed to install the gang box, and any additional wiring needed to extend the power or ground cables.
If any of the items listed in the wiring kit are missing, you may contact your dealer and order a
replacement kit.
VERY IMPORTANT:
Quantity
1
1
1
1
2
1
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
Picture
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
11
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SALG Series and is the answer not in the manual?