Table of Contents
Advertisement
TR-2100 User Manual
86
DNP Configuration
To set the DNP communications format, open the Display Station32 Communications
software, select 'Configuration' in the 'Recorder' menu, and then click on 'DNP
Parameters'. The following setup screen will appear.
Note: Since the present implementation of DNP is on an RS232 link, some of the parameters
are not used.
The IED address
This can be set from 1 to 65534. Number 65535 is reserved for the broadcast address.
Transmission delay
This is the time to disable the Master transmitter on an RS485 network and is not currently
used.
Confirm Mode
This can be set as Never/Sometimes/Always. The default value is Never.
Retries
This is the number of times that a Data Link will attempt to be established. Valid numbers
are 0 - 255. 0 disables retries.
Hide quick links:
Advertisement
Table of Contents
