Tr-2100 Calibration - Main Window - Ametek TR-2100 Operation Manual

TR-2100 User Manual
TR-2100 Calibration – Main Window
There are four options on the main window:
Connect - connect to a TR-2100
Disconnect - disconnect from a TR-2100
Configure - configure the baud rate and communication port
Exit - exit the program
Communication Port Configuration
Ensure the communication port has been set up correctly before attempting to connect to a
TR-2100. Use the Configure button to set up the parameters. The following window will be
displayed:
Select the communication port you are using on your PC. The baud rate must be the same as
set in the recorder, which is determined by DIP switches in the TR-2100 (see chapter 4).
Connect the Com port on the PC to the connector at the front left of the TR-2100 using the
'null modem' cable provided with the recorder.
34