Setting Fence Stops - Grizzly G0813 Owner's Manual

Setting Fence Stops

The fence stops simplify the task of adjusting the
fence to 90˚ and 135˚ (45˚ outward).
Tools Needed
45° Square ........................................................ 1
90° Square ........................................................ 1
Sliding Bevel ...................................................... 1
Open-End Wrench 12mm .................................. 1
Setting 90° Fence Stop
1.
Use a 90˚ square to adjust fence to 90˚ (see
Figure 80).
Figure 80. Example of adjusting fence to 90˚.
2. Flip 90˚ swing stop into position shown in
Figure 81.
Fence Stop Bolt
Jam Nut
Figure 81. 90˚ swing stop engaged.
3.
Loosen jam nut on 90˚ fence stop bolt (see
Figure 81).
4.
Adjust the 90˚ fence stop bolt until it makes
contact with 90˚ swing stop.
5. Retighten jam nut loosened in Step 3.
-50-
Qty
Swing Stop
Setting 135° Fence Stop
1. Disengage swing stop (see Figure 81).
2.
Use a sliding bevel adjusted to 135˚ to adjust
fence to 135˚ (45˚ outward) position, as
shown in Figure 82.
Figure 82. Example of adjusting fence 45˚
outward.
3.
Loosen jam nut on 135˚ stop bolt (see
Figure 83).
135° Stop Bolt
Figure 83. Location of 135˚ stop bolt and
jam nut.
4. Adjust 135˚ stop bolt until it makes contact
with back of fence.
5. Retighten jam nut loosened in Step 3.
Model G0813/G0814 (Mfd. Since 3/16)
Jam Nut