Section 6: Maintenance; Schedule; Cleaning & Protecting - Grizzly G0813 Owner's Manual

SECTION 6: MAINTENANCE

To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.

Schedule

For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily
• Vacuum all dust on and around the machine.
• Wipe down tables and all other unpainted
cast-iron with a metal protectant.
• Check for/repair worn or damaged wires
(Page 55).
• Check/replace damaged cutterhead or blades
(Page 45).
• Check/retighten loose mounting bolts.
• Check/resolve any other unsafe condition.
Monthly
• Belt tension, damage, or wear (Page 51).
• Clean/vacuum dust buildup from inside stand
and off of motor.
Model G0813/G0814 (Mfd. Since 3/16)
Cleaning &
Protecting
The cleaning process for this machine is simple.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin dissolving cleaner
to remove it. Treat all unpainted cast iron and steel
with a non-staining lubricant after cleaning.
Protect the unpainted cast iron surfaces on the
table by wiping the table clean after every use—
this ensures moisture from wood dust does not
remain on bare metal surfaces.
Keep tables rust-free with regular applications of
products like G96 Gun Treatment, SLIPIT
®
Boeshield T-9.
®
G5562—SLIPIT® 1 Qt. Gel
G5563—SLIPIT® 12 Oz. Spray
G2871—Boeshield® T-9 12 Oz. Spray
G2870—Boeshield® T-9 4 Oz. Spray
H3788—G96® Gun Treatment 12 Oz. Spray
H3789—G96® Gun Treatment 4.5 Oz. Spray
Figure 61. Recommended products for
protecting unpainted cast-iron and steel.
, or
®
-41-