Stopping Procedure - Hyundai HYBCF31 User Manual

Once the engine has been started and allowed to warm up you can use the throttle lever to accelerate
the engine speed. You can also use the Throttle lock button – this allows you to set the throttle. To
release the throttle lock juts press the throttle lever gently to release the lock button.
4.

STOPPING PROCEDURE

4.1. Before stopping the machine allow the engine to cool down for a few minutes, by
allowing it to run without throttle.
4.2. You MUST allow the cutting head to come to a full stop before carrying out any
maintenance on the machine.
To STOP the machine release the throttle lever, allow the machine to cool down with no throttle then
If not already in OFF position move the choke to the OFF position.
move the power switch to the OFF position.
Page 22 Ver 4 - September 2016