Hyundai HYBCF31 User Manual page 11

Place handlebar into lower half of clamp assembly and close the upper half over the top.
Pass the release knob through both halves of the assembly then through the spring. Offer this
to the fixed clamp on the handle bar. Apply pressure to squeeze the spring then turn the
release knob in a clockwise direction and tighten fully.
Trimmer blade assembly.
2.5.
Before fitting the trimmer guard to the machine you must first fit the trimmer guard cord
cutter. Take the cutter blade and 3 self-tapping screws from the Blue tool bag. Align the cutter
blade as shown and fix into place. N.B. Keep the protective sleeve in place until blade is fully
secured and ready for use.
Page 11 Ver 4 - September 2016