Table of Contents
Advertisement
2.10. Head shield/Ear defender assembly.
Rotate to align the tags on the helmet to match the holes on the top of the visor. Place the visor over
the tags, then rotate the tags 180° to secure into place. Place the ear defenders over the outside of the
headband on the helmet and place into the clips.
2.11. Fitting/replacing spool line.
Squeeze the bump head unit either side on the grooves and pull to remove the top of the
head. Remove the spool, spring and washer from the spindle.
Page 17
Ver 4 - September 2016
Hide quick links:
Advertisement
Table of Contents
