Hyundai HYBCF31 User Manual page 12

2.6. Trimmer guard assembly.
The trimmer guard needs to be fixed onto the lower shaft before it is mounted onto the
machine. Take the trimmer guard clamp and 2 fixing Allen bolts from the tool bag then attach
them to the trimmer guard. At this stage DO NOT overtighten the bolts.
Place the semi assembled trimmer guard and slide it over the shaft as shown below.
You will need to rubber bung of the end of the lower shaft – retain the bung for future use as it
helps to keep the drive shaft clear and free of debris.
Once the guard clamp has been located into the hole of the shaft tighten the two fixing bolts.
Page 12 Ver 4 - September 2016