Using The Machine - Hyundai HYBCF31 User Manual

5.

USING THE MACHINE

You MUST STOP using the machine if any
of the following occur.
• The engine speed changes with no
control.
• When blades are damaged
• In case of misfire
• In case of high vibration.
• When flames or smoke appear.
• In rain or stormy weather.
If you are not familiar with this type of
machine you should practice in a safe
place.
5.1. Accessories.
5.2.1. Make sure that your product is only
equipped with original accessories. Only
use the machine with original parts which
are specified by the manufacturer. The use
of any other accessories may cause injury
to the user and damage to the machine.
5.2. Wearing the shoulder harness.
When you use this machine always wear the
provided harness.
Make sure that the machine is securely
hooked onto the strap.
If you do not, you will not be able to control
the machine safely.
This may result in injury to yourself or other
people.
Never use a harness with any type of defect
especially with a defective quick release
mechanism.
5.3. Trimming techniques.
Always trim or cut with the engine running
at high speed.
5.3.2. Do not run the machine slowly
except for when warming up before use or
cooling down after use.
5.3.3. Swing the nylon cutting head of the
trimmer horizontally from left to right.
5.3.4. Keep cutting deck parallel with the
ground. Do not tilt the nylon cutting or
blade head during operation.
5.3.5. For correct cutting height trim in
advance in a test area.
5.3.6. Keep nylon cutting or blade head at
the same level for even depth of cut.
5.3.7. Nylon trimming head is only to be
used for cutting grass.
5.3.8. Metal blade head is only to be used
Page 23 Ver 4 - September 2016