Advertisement
Quick Links
Advertisement
Related Manuals for Arecont Vision Megaball series
Summary of Contents for Arecont Vision Megaball series
- Page 1 Arecont Vision MegaBall™ Installation Manual 0 | P a g e...
- Page 2 Arecont Vision MegaBall™ Installation Manual MegaBall™ Wall Mount Version (-W) Installation Manual Inside the box: Plug the Ethernet cable into the MegaBall™ PoE female RJ45 connector. (Image 2) Arecont Vision MegaBall™ camera with NOTE: If the camera will be powered via PoE, wall mount (indoor use only) please skip to step 5.
- Page 3 Arecont Vision MegaBall™ Installation Manual Adjusting the Tilt, Pan, Z-Axis (yaw): installation practices are not covered under warranty! To adjust the camera tilt, pan or z-axis (yaw), Adjusting the Focus, Iris and Field of View: loosen the ring on the wall mount bracket as...
-
Page 4: Digital Out
Arecont Vision MegaBall™ Installation Manual MegaBall™ Dome Version (-D) Installation Manual Inside the box: Using the mounting template, prepare the Arecont Vision MegaBall™ camera with in- mounting surface for camera installation ceiling mount (indoor use only) Surface mount (preassembled on dome) Plug Ethernet cable into the MegaBall™... - Page 5 Arecont Vision MegaBall™ Installation Manual Using the provided Security L-key (Image In-ceiling Mount Installation (Optional) 1F), loosen the three (3) screws securing the Using the mounting template, cut a hole in the dome cover (Image 3). Remove the vandal surface for mounting.
- Page 6 Arecont Vision MegaBall™ Installation Manual Adjusting the Tilt, Pan, Z-Axis (Yaw): Adjusting the Focus, Iris and Field of View: To adjust the camera tilt, pan or z-axis (yaw), For the vari-focal model, adjust focus, iris and loosen the 3 set screws on the in-ceiling field of view using the provided Security L-Key mount as shown in Image 6.
- Page 7 Arecont Vision MegaBall™ Installation Manual Dome Cover (Bubble) Installation (Optional): Optional: Connecting Digital I/O: Remove the O-ring (Image 1C) from the bezel To use the digital I/O, connect the digital I/O by pushing on the 4 drift pins on the back of to the pigtail cable connector as shown in bezel shown in Image 11.
- Page 8 Select “Run” next to “Setup Cameras” from the AV100 application manager as shown in Image 16 Image 15 and wait for “Arecont Vision For basic mode, select “Install Cameras” on Camera Installer” window to appear as shown the Arecont Vision Camera Installer as shown in Image 16.
- Page 9 Arecont Vision MegaBall™ Installation Manual Image 17 When all cameras are discovered and installed and display “Installed, online”, select “Save/Exit.” The AV100 application main menu will appear. From the “AV100 Application Manager” menu, select “Run” next to “Live video” to view live images.
- Page 10 Arecont Vision MegaBall™ Installation Manual P a g e...
Need help?
Do you have a question about the Megaball series and is the answer not in the manual?
Questions and answers