4.2.10 Passcode And Login - GE LM10 Instruction Manual

CHAPTER 4: FUNCTIONALITY

4.2.10 Passcode and Login

LM10 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
* Feature currently not available.
An auxiliary relay can be connected to any number of warning devices. With the settings in
this menu, the user can select which combination of trip conditions will activate the
auxiliary relay.
PATH: Configuration
Configuration
Passcode,login
Run Operations
Factory default
A passcode is required to change configuration parameters. Without a passcode, the
display will only indicate configuration parameters, current operating conditions, and
history records. This security feature reduces the likelihood of inadvertent changes.
To make any configuration changes, the login level must be set to "Config". The "User" login
simply allows viewing of history and current status but will not accept changes to any
parameters. As an extra security feature, the login level can automatically be set to "User"
via DeviceNet communications. Refer to Assembly Object, Class Code 4, Instance 100 for
more information.
Aux Relay Faults Range:
Load Loss off
Aux Relay Faults Range:
*
Power Failure off
Aux Relay Faults Range:
Aux Sense off
Aux Relay Faults Range:
Device Net off
Aux Relay Faults Range:
Volt Range off
Aux Relay Faults
Pass Code, Login
User:
Pass Code, Login Range:
Config:
Pass Code, Login Range:
Change Pass Code
CONFIGURATION SETTINGS
on, off
on, off
on, off
on, off
on, off
0 to 65535 in steps of 1
0 to 65535 in steps of 1
4–37