Assembly Object - GE LM10 Instruction Manual

DEVICENET OPERATIONS
5.1.6

Assembly Object

5–48
DeviceNet Object, Class Code 3, Instance 1, Attributes:
Attribute Access
2 Get Baud Rate, value 0 to 2 (125, 250, and 500 kbps)
5 Get Allocation information
The assembly objects bind attributes of multiple objects to allow data to or from each
object to be sent or received over a single connection. There are 8 instances of the
assembly object for the device. The instance attribute is always 3 in this class.
Assembly Object, Class Code 4, Services:
Code Name and Description of Services Available to this Object
0x0E Get_Attribute_Single: Returns the contents of the given attribute.
0x10 Set_Attribute_Single: Sets the contents of the given attribute.
0x4C Release: Deletes predefined M/S connections.
Assembly Object, Class Code 4, Attributes:
Attribute Access
none --- ---
Assembly Object, Class Code 4, Instance 3:
Attribute Access
3 Set Device outputs (see format and mapping below) byte
Data Formats for Device Outputs
Bit Position Name
Bit 7 Reserved
Bit 6 Reserved
Bit 5 Reserved
Bit 4 Reserved
Bit 3 Reserved
Bit 2 Reset
Bit 1 Reserved
Bit 0 Run 1
Assembly Object, Class Code 4, Instance 4:
Attribute Access
3 Set Extended device outputs (see format and
mapping below)
Data Formats for Extended Device Outputs
Bit Position Name
Bit 7 Reserved
Bit 6 Reserved
Bit 5 Reserved
Bit 4 Reserved
CHAPTER 5: COMMUNICATIONS
Name/Description
Name/Description
Name/Description
Value
---
---
---
---
---
---
---
---
Name/Description
Value
---
---
---
---
LM10 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
Data Type Value
UINT from DIP
switches
STRUCT from
service
Data Type Value
--- ---
Data Type Value
see below
Data Type Value
byte see below