Ack Handler Object; Overload Object - GE LM10 Instruction Manual

DEVICENET OPERATIONS
5.1.8

ACK Handler Object

5.1.9

Overload Object

5–54
Attribute Access
7 Get Produced connection size
8 Get Consumed connection size
9 Get/Set Expected package rate
12 Get/Set Watchdog timeout action
13 Get Produced path length
14 Get Produced path
15 Get Consumed path length
16 Get Consumed path
17 Get Production inhibit timer
The 'acknowledge handler object' manages the reception of message acknowledgments.
ACK handler Object, Class Code 0x2B, Services:
Code Name and Description of Services Available to this Object
0x0E Get_Attribute_Single: Returns the contents of the given attribute.
0x10 Set_Attribute_Single: Sets the contents of the given attribute
ACK handler Object, Class Code 0x2B, Attributes:
Attribute Access
none --- ---
ACK handler Object, Class Code 0x2B, Instance 1:
Attribute Access
1 Get/Set Acknowledge Timer
2 Get/Set Retry Limit
3 Get COS Connection Instance
USINT = 8-bit unsigned integer
UINT = 16-bit unsigned integer
The overload object allows the getting of the active parameter values.
Overload Object, Class Code 0x2C, Services:
Code Name and Description of Services Available to this Object
0x0E Get_Attribute_Single: Returns the contents of the given attribute.
Overload Object, Class Code 0x2C, Attributes:
Attribute Access
none --- ---
CHAPTER 5: COMMUNICATIONS
Name/Description
Name/Description
Name/Description
Name/Description
LM10 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
Data Type Value
UINT 0x0008
UINT 0x0000
UINT 0x00
UINT 0x00
UINT 0x0006
BYTE [6] <null>
UINT 0x0004
BYTE [6] <null>
UINT 0x0000
Data Value
--- ---
Data Type Value
UINT 16
USINT 1
UINT 4
Data Value
--- ---