Table of Contents
Advertisement
if equipped
The porcelainon the burner is durable but may gradually
Under no circumstancesare the surface burner
lose its shine due to usage and high temperatures.
assembliesto be taken apartfor cleaning. The surface
burner assemblycan be removed to clean the burner box
The sealed surface burners are secured to the cooktop
area.
and are NOTdesigned to be removed by the consumer.
FreestandingRange Only:
Select modelsfeature twospecialSUPER HIGH SPEED
The twosurfaceburnerassembliesare securedin place
sealedburnerslocated at the right-frontandleft-rear.Use
duringtransportation w ithscrews.Oncethe rangeis
theseburnersto quicklybringwaterto a boil and when
installed, t hesescrewsmaybe removed to allowquick
usinglargerpans.See information onratingplate, located
andeasy removal o f the burnerassemblies,
on the lowerrangefrontframe behindthe broilerdooror
lowerpanel,to determineifyourappliance featuresthese
__
burners.
-_C_
Clean burnercap after eachuse especiallyif a spillover
s_
-_
occurs.A soiled burner may resultin improperignition or
•
an uneven flame. When cleaningthe sealed surface
burner,use care to prevent damageto the ignitor.If a
__
cleaningcloth shouldcatch the ignitor, it couldbe
I__
damagedor broken.
Lip
To remove: Allowthe burnerassemblyto cool. Lift up
__
Ignitor
cooktop. Graspthe burner assemblyand rotate it slightly
towardthe left to release the two tabs on the assembly....
Portdirectlybelowignitor
Then lift the assembly and pull toward the backof the
cooktop untilthe air shutter ends on the assembly release
from the valves.
The surface burner will not light if the ignitor is damaged,
To replaoe: Insertthe air shutterends on the burner
broken, soiledor wet. The burner will also not light if the
assembly overthe valvesand lowerthe assemblyinto
ports,especially the small port locateddirectlybelowthe
place.Be sure tosecurethe twotabsontheburner
ignitor, a re blocked.See page20 for cleaninginstructions
assemblyintothe twoslotsonthe burnersupportbracket
whichis mounted to the burnerboxbottom.(NOTE: If the
NOTE:When one surfaceburneris turnedto the LITE
tabsarenotproperlyinsertedintothe slots,theassembly
position, a ll fourignitors willspark.Oncethe burnerlights
may rockandthe burnersmaynotlightproperly.)
turnthe knobtothe desiredflamesize.
Advertisement
Table of Contents
