Array Ganging - Martin Audio MLA MINI Advanced User's Manual

MLA MINI
VU-NET
In exactly the same way as other devices you can choose to gang the entire arrays, just the input
parameters, the output parameters by zone or individual parameters. Note that all gain and delay
parameters are offset ganged. If there is already a value entered before ganging is implemented
this will be retained and subsequent changes to a value to any ganged gain or delay will increase
or decrease all values according to any edits you make but will retain the offset between all
values.
There are the same 20 independent groups available for both types of ganging, selected by the
coloured Group buttons along the top of the window in the Unassigned Groups section

Array Ganging

To gang an entire array, click on all arrays you wish to be ganged together. In our example we will
gang the main left and right arrays and on a second group the two side arrays. There is no need
to select a group they will be assigned automatically with different groups for each zone. You will
need to select a different group to zone the side hangs:
If you wanted all four arrays zoned together you can use the double arrows that appear on any of
the buttons when you hover the cursor over them for over a second:
When you gang arrays which have different numbers of zones you will see this message:
MLA Mini Vu-Net V1.0
228