Rigging - Martin Audio MLA MINI Advanced User's Manual

MLA MINI
ADVANCED USER GUIDE

RIGGING

This section of the Advanced User Guide covers the mechanical aspects of assembling the
various components of the MLA Mini system into the various possible rigging configurations.
The components required for each are summarised in the table below. Note that the component
count applies to a single system; for stereo, the quantities should be doubled.
Component
Preset Configuration
1&2 Pole Mount
3 Pole Mount
4 Ground stack
5* Flown array
(Flying Frame)/
Floor sub
Flown array
(Universal Tilt
Bracket)/Floor
sub
6 Fully flown
*The configuration for Preset 5 can be flown either using the Flying Frame or the Universal Tilt Bracket inverted.
54
Universal
Pole Fixed Tilt
Tilt
Mount Bracket
Bracket
1 1
1 1 1
1
Ground Ground
Transition
Stack Stack Bar
Frame
Baseplate (long)
1
1
1 1
1
MLA Mini Advanced User Guide V1.0
Flying
Frame
1
1
1